BigGameHoundsmen.com

Thought this would be fun. I posted this a few years back and was wondering how many are doing it.
As we know ,for those of us who have done it, good tools and sharp tools make a job easier. I want to know how you are sharpening you Hoof knives, rasps, pocket knives. And maybe some of you know how to sharpen your hand tools( I dont ).
Lets hear how you do it and then I will tell you my how I do it.

I use to go through a rasp a day and I would keep about 7 knives on hand and switch out throughout the day. Now if I was still a farrier full time I would go through a rasp a month and I only have one knife I use. What do you use and go through?

I have shod horses for 14+ years. I can tell you that there are a couple of factors in keeping tools sharp. When I shoe ranch horses with rock hard feet it eats a knifes edge...shoeing hunter/jumpers that are kept in stalls all day is a different story. There is nothing that makes a shoeing look prettier than extremely sharp knives. Another HUGE factor is what knives and tools you're using. I have one of me best friends who I competed with in the World Championship Blacksmiths who owns Yukon Forge. He builds some of the best knives I've ever used. The best way to sharpen a knife is with a wheel using a red rouge then a white buffing compound on the other wheel. Another key thing is to keep the bottom side of the blade flat. The wheels that I use are a cloth wheel. The red rouge is melted with a water combo then allowed to dry on wheel...The white rouge get reapplied about everytime I sharped. I have seen every kind of file to sharpen a knife and they just hack up a blade.

When I was competing all over I got in the habit of using many sharp sharp knives, and I still like to keep a bunch sharp. I like to sharpen them in my shop so I don't do it in the field.

As for rasps, I love Heller white tang rasps, I use them about 30 horses. You can find cheaper but I love the fine side of these rasps. I also use a seperate finish rasp.

I really do think it boils down to what and who your shoeing for. If I was shoeing ranch horses full time I'd have 1 knife, good sturdy rasp and I'd probably do most of my sole work with nippers. Shoeing horses where looks count too and there are no shortcuts to good rasp and good knife work...

Hand tools? I've never had much luck sharpening my own nippers etc. Don't know many guys who have. I usually use GE and then rebuild them somewhere. Love rebuilt nippers!

chainsaw file for the Knife...only use cheap knives mostly frost use a couple up a year.
when it dries up you cannot use a knife here at most stops. Use a pair of GE half rounds.
Tried most brands of knippers always go back to GE..Lopez is just as good or better but harder to get in Canada.
In the summer I may use a rasp a week or less but come winter can put months on one.
Prefer save edge rasp for there durability but tough to get a good finish...I don't really like the hellers but they are mostly what is stocked local so I have used them alot as well...

Best knife i ever had was a Peterka...watched him make them one day in a charcoal forge at hastings park..Joe knew how to sharpen a knife...

Andy

John has won the tong class at Calgary a few times as well. In 2007 he competed with Bill Poor in the tong class and that was the year Bill won the world. They had to make a set of tongs and then use them to build a set of ox shoes. Bill flew up to CO and we practised for a week straight. I ran a fire and struck for them till I wanted to die. THe final pair of tongs made in practise were PERFECT and they gave them to me...John stamped the Yukon logo on one side and bill stamed B. POOR on the other...those babies are kept safe, probably won't use them....

Shanes stuff is top shelf though...Shane learned from the godfather himself, Jay Sharp, in Salmon ID. I was at a comtest with WCB in 07 and Jay brought down some of the projects he was working on...Unreal damascus work and all hammer finished. Shane has judged some of the contests and he is one heck of a judge, truly topshelf in his judging and his character...

Jay would come down every summer and stay with Shane and I would go over and visit him for hours and hours the bits and spurs and hand tools and shoes that he made out of Damascus was unreal. HE would throw away stuf that I would have been veery proud of. Shane keeps saying he is going to come up for a hunt but he is a busy boy.
Was a real treat working with Ole Jay Sharp and seeing him work he really is a Godfather of the forge.

Jay really liked my daughter and made her a 1lb rounding hammer and they would make stuff together. He is a great guy

I agree, watching Jay forge was something that could only be appreciated by somebody who understood just how good he was. Hopefully Shane will get out and hunt with you....it's good for those guys to get out of the shop every now and then

That's really cool Jay made your daughter that hammer...tell her not to loose that one! That is a true heirloom peice...

Going thru some of the back posts & saw this. I have been a farrier since 1980. I have run the gauntlet as far as sharpening knives from diamond steel, files but agree that buffing wheels with rouge & the white compound are the best. I just started using the work sharpner to sharpen my knives. It is easy but does not do as good of a job as the buffing wheel. I use mostly G.E. tools & Simmonds black master rasps.
At one time 75$ of my work was racehorses but now it is mostly showhorses. Saddlebreds, or hunter jumpers.