Page 4 of 5

Re: lest see all the home made dog boxs

Posted: Tue May 18, 2010 11:29 am
by chilcotin hillbilly
BearHunter'90 wrote:yeah that is nice where was that pic taking?


Down the road about 5 miles from my house here in Tatlayoko lake, BC

Re: lest see all the home made dog boxs

Posted: Tue Jun 29, 2010 9:18 pm
by Spokerider
Image
Image
Image
Image
Image


I borrowed Poundhound`s dog box idea of angled upper sides since I thought it to be a good idea.
Made from three eights ply on sides and bottom, top being five eights ply.

All the corners have been fiberglassed, and the whole top glassed too. Plywood attached to two by two frame with screws and consruction adhesive. S1 Epoxy sealer on the exterior ply and metal, with paint over top. Custom welded doors and handles from scrap I had lying about. Already had the rig frame from another project, so I used it as it was one less thing to fab.

I wanted the top to be removeable, for easy access for cleaning and for installation of ridgid foam insulation later in the winter, so I hinged the top lid, with through-bolt fittings to secure the rear lid. Have a rubber mat for the rig deck.

Used marine deck plates for the box holes. The inserts just screw on and out as desired.

Dang box should be pretty water tight and not double in weight after a few soggy outings, which is common hunting here. :roll:

Re: lest see all the home made dog boxs

Posted: Thu Sep 09, 2010 11:36 pm
by rattrod30
Our camping box,not exactly geared towards hunting,but then neither are my biscuit eating plotts .

Re: lest see all the home made dog boxs

Posted: Wed Nov 03, 2010 2:06 pm
by Brianshounds
these are the last couple i have built the first one is my dads it is 4' wide and 3.5' deep the next is mine it is 4' wide and 5' long

Re: lest see all the home made dog boxs

Posted: Wed Nov 03, 2010 10:40 pm
by radar
Great job.do you treat the plywood?

Re: lest see all the home made dog boxs

Posted: Thu Nov 04, 2010 1:09 pm
by Brianshounds
i use tomsons clear or redwood water seal. i have one that is about 6 years old and it sets out in the weather year round. hasnt rotted yet.

Re: lest see all the home made dog boxs

Posted: Fri Nov 05, 2010 2:05 am
by radar
Right on I like the idea, its darn good slidin.Whats up with the lip in front? is it to keep what ever you use for bedding from slushin out?

Re: lest see all the home made dog boxs

Posted: Mon Nov 08, 2010 3:51 am
by bency
Brian,

thats a nice box, i really like it.

Re: lest see all the home made dog boxs

Posted: Tue Jan 11, 2011 2:22 pm
by Brianshounds
ya it helps keep the straw in.

Re: lest see all the home made dog boxs

Posted: Sun Feb 13, 2011 3:04 am
by Jlhoutfitters
big truck big hounds love runnin Bloods

Re: lest see all the home made dog boxs

Posted: Sun Mar 13, 2011 9:00 pm
by hndhunter
Image
Made a frame out of wood then insulated it with one inch foam, then coated the inside and exterior with sheet metal. Works

Re: lest see all the home made dog boxs

Posted: Sun Mar 13, 2011 9:14 pm
by hndhunter
Image

Re: lest see all the home made dog boxs

Posted: Mon Jul 18, 2011 5:33 pm
by irishhunter13
this is in a 98 wrangler
box3.jpg
box4.jpg

Re: lest see all the home made dog boxs

Posted: Wed Jul 27, 2011 3:25 am
by nait hadya
just tossed this together with some scrap plywood laying around the house. it should hold four comfortably albeit a bit on the tippy side.

Image

Image

Re: lest see all the home made dog boxs

Posted: Sun Jul 31, 2011 2:23 pm
by jcathunter
Almost done.
Image