DC 30 questions

Post your product review or ask questions on products

Post Reply
krk hunting
Bawl Mouth
Bawl Mouth
Posts: 383
Joined: Tue Feb 19, 2008 2:18 am
Location: Arizona
Location: AZ

DC 30 questions

Post by krk hunting »

Has anyone had any luck adding the dc 30 to your tritronics collars? will it work, before i try?

Junk
Product is Important but the Experience is Everlasting
ferjr
Open Mouth
Open Mouth
Posts: 745
Joined: Sun Jun 06, 2010 7:29 pm
Location: idaho

Re: DC 30 questions

Post by ferjr »

havnt tried it, but if it works i would like to hear about it
camojoe
Posts: 8
Joined: Tue Jul 06, 2010 7:30 pm
Location: Idaho

Re: DC 30 questions

Post by camojoe »

I have but you need to convert the dc30 to a dayglo collar.take apart the original dc30 I like to split the nylon collar seem where the gps cable runs but I don't save it so I cut the threads with a razer blade. Once disassembled get a D loop collar not center ring I match color to shock unit put shock unit on first close to buckel hold gps next to shock unit mark holes then get 1 inch tube(bicycle) cut to length hole in center for antennae mark holes for gps antennae and assemble really easy works as good as before conversion and side by side factory unit. For smaller dogs I zig zag gps cable under tube to shorten so collar will get tight enough. If you want to keep nylon collar pinch collar where cable runs and work out gently no to break cable. I use with older larger unit will work great with smaller G3 units.
Melanie Hampton
Open Mouth
Open Mouth
Posts: 921
Joined: Mon Jun 25, 2007 5:13 pm
Location: Oregon
Location: Currently hunting Southern Oregon

Re: DC 30 questions

Post by Melanie Hampton »

camojoe wrote:I have but you need to convert the dc30 to a dayglo collar.take apart the original dc30 I like to split the nylon collar seem where the gps cable runs but I don't save it so I cut the threads with a razer blade. Once disassembled get a D loop collar not center ring I match color to shock unit put shock unit on first close to buckel hold gps next to shock unit mark holes then get 1 inch tube(bicycle) cut to length hole in center for antennae mark holes for gps antennae and assemble really easy works as good as before conversion and side by side factory unit. For smaller dogs I zig zag gps cable under tube to shorten so collar will get tight enough. If you want to keep nylon collar pinch collar where cable runs and work out gently no to break cable. I use with older larger unit will work great with smaller G3 units.
Do you have a picture of that? I'm a visual person :D
Melanie Hampton
Home of OutWest Hounds
Image

You've only got 3 choices in life
give in, give up, or give it all you got.

http://www.outwesthounds.com
camojoe
Posts: 8
Joined: Tue Jul 06, 2010 7:30 pm
Location: Idaho

Re: DC 30 questions

Post by camojoe »

i am new to posting stuff on here so if it dont work the first time BEAR with me ill try to post apic. the pic i have is the first one i converted try to get the gps unit as close to the shock unit as you can makes more room for tighting collar and shorten distance between gps unit and gps ant. for smaller dogs.
Image
Post Reply

Return to “Equipment and Product Review”